mikromedia for PSoC 5LP

Status:

mikromedia3_on_v3.pngmikromedia3_on_v2.pngmikromedia_3_for_PSoC5LP_v1.png

Smart programmable touch 2.8'' display,
packed with features.

Mikromedia can be used for controlling a wide range of applications: from simple hobby projects, up to entire machine installations. It is powered by CY8C5868AXI-LP035 microcontroller unit, it gives you true power to build GUI-centric embedded applications.

Main features

Multimedia modules

video-player.png

Large 320x240 TFT Color Display with Touch Screen, Stereo MP3 Codec, and Accelerometer give you true power to build full multimedial applications.

It’s really compact

compress.png

Board is carefully designed and is very compact and handy. We have used the highest quality components and 4-layer PCB to achieve maximum efficiency.

Just plug-in the USB cable

socket.png

Charge your batteries directly from USB port. No additional electronics, or expensive adapters. Just plug-in the cable, and this little board will handle the rest.

Many more megabytes

database.png

You can save pictures, sounds and other media files on microSD memory card and 8Mbit Serial Flash Memory and use it in your application.

What’s on Board

Click on the desired thumbnail to view full image.

psoc_5lp_front_v1.png
pins.png
pins.png
cercle_rouge.png
tft.png

TFT with Touch Panel

320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.

frontal_reset.png

Frontal Reset Button

If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.

audio_con.png

Audio connector

Plug-in your headphones and listen to audio output from mp3 decoder circuit.

power_led.png

Power LED

We have added power indicator LED, so you can be sure whether your board has stable power supply.

battery_charger.png

Battery Charger circuit

MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.

battery_conn.png

Battery connector

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

miniusb.png

miniUSB connector

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

power_reg.png

Power regulator

On-Board power regulator ensures that each part of the board get the right voltages.

rtcc_cryst.png

RTCC Crystal Oscillator

Board contains 32.768kHz Crystal oscillator (X2) which provides external clock for internal RTCC module.

mp3_codec.png

Stereo Audio codec

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.

connection_pads.png

Connection pads

Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.

crystal_oscillator.png

Crystal Oscillator

16Mhz crystal oscillator circuit that provides external clock is connected to microcontroller osc pins.

accele_rometer.png

Accelerometer

On-board ADXL345 Digital Accelerometer allows you to measure acceleration.

mcu.png

Microcontroller

Powerful CY8C5868AXI-LP035 microcontroller with the ARM Cortex-M3 core, operating at 67 MHz with 256 KB of Flash memory and up to 64kb of RAM.

fram.png

FRAM

Store 2 Mbit of data in FM25H20 Ferromagnetic RAM with up to 40 MHz SPI interface. It suports over 100 trillion Reads/Writes and has over 10 Year Data Retention.

microsd_slot.png

microSD card slot

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.

mikroprog_connector.png

mikroProg connector

Pads for connecting and programming the board with mikroProg for PSoC® 5LP programmer.

debug_connector.png

Cortex Debug connector

The Cortex Debug Connector supports JTAG debug, Serial Wire debug and Serial Wire Viewer operations (via SWD connection when Serial Wire debug mode is used).

psoc_5lp_back.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png

Why choose mikromedia

Programming

programming.png

On-board CY8C5868AXI-LP035 microcontroller is preprogrammed with fast USB HID bootloader, so it’s ready to work right out of the box. You don’t have to spend a dollar more on programmers. For those who need it, board can also be programmed and debugged using mikroProg™ for PSoC® 5LP debugger.

Compilers

3d-printing-software.png

Mikromedia for PSoC® 5LP is fully supported by PSoC® Creator™, the free Windows-based IDE from Cypress which allows concurrent hardware and application firmware design.

why_choose_mikromedia_pic18fj_111.png

Modules

Click on the desired thumbnail to view full image.

Audio connector

PSoC_audio_small.png

Plug-in your headphones and listen to audio output from mp3 decoder circuit.

Stereo Audio codec

PSoC_codec_small.png

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.

microSD card slot

PSoC_microsd_small.png

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SDIO communication.

Microcontroller

PSoC_mcu_small.png

Powerful CY8C5868AXI-LP035 microcontroller with the ARM Cortex-M3 core, operating at 67 MHz with 256 KB of Flash memory and up to 64kb of RAM.

miniUSB connector

PSoC_usb_small.png

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

Battery connector

PSoC_battery_small.png

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

Downloads

mikromedia for PSoC® 5LP Examples
mikromedia for PSoC® 5LP Bootloader
mikromedia for PSoC® 5LP User Manual
mikromedia for PSoC® 5LP Pinout
mikromedia for PSoC® 5LP Schematic
mikromedia for PSoC® 5LP AutoCad File

Product Specification

Type mikromedia 7
Architecture ARM (32-bit)
Display size 2.8"
Resolution 320x240px
Graphic controller ILI9341
Touch Screen Resistive
Silicon Vendor Cypress
Frame Type Standard
Features Accel,Battery Powered,MP3,SD Card
Display type mikromedia

Shield - Extension for mikromedia

This is just simple demonstration. You can use many other combinations.

Click
Click
Click
Click
Click
Clicker 2 for PIC18FJ
Click
Click
Click
Click
Click

mikroBUS Shield for mikromedia

mikroBUS shield is an extension board pin-compatible with all mikromedia boards, that features two mikroBUS host sockets which allow you to connect dozens of Click boards.


With this feature, you can provide desired additional functionality to your mikromedia board. Prototyping breadboard area is also available for placing additional components and expanding the base functionality with custom features.


Prototyping breadboard area is also available for placing additional components and expanding the base functionality with custom features. Board comes with two 1x26 pin female sockets, as well as four 1x8 female sockets for mikroBUS host connectors.

What’s in the Package

mikromedia for PSoC 5LP what is in boxmikromedia for PSoC 5LP what is in box


OFF

mikromedia for PSoC 5LP

PID: MIKROE-1448

Weight: 140 g

5 10 20

Quantity discount

QTY % PPU
2 5% $147.06
3 10% $139.32
5 15% $131.58

$154.80

Was: $154.80

SAVE: $0.00

Total Save:

Status:

Secure online payments provided by 2Checkout.com, Inc.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party.

2checkout payment

YOU MIGHT ALSO NEED

Send a message

mikromedia for PSoC 5LP

mikromedia for PSoC 5LP

What can we do for you?